noodls browser compatibility check

The security settings of your browser are blocking the execution of scripts.

To use noodls, javascript support must be enabled. Please change your browser's security settings to enable javascript.

If you have changed your browser's security settings, you can click here.

related announcements

Company News

Middlesex Water Company

Management Change/Compensation Form 8 K
Sixth Street Specialty Lending Inc.

Q3 2024 Sixth Street Specialty Lending Inc Earnings Presentation
D&B - Dave & Buster's[...]

Amendment to Statement of Changes in Beneficial Ownership - Form 4/A

Chemicals

Core Molding Technologies Inc.

11/05/2024 | Press release | Distributed by Public on 11/05/2024 15:52

Quarterly Report for Quarter Ending September 30, 2024 (Form 10-Q)

cmt-20240930

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q


☒	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended September 30, 2024


☐	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

for the transition period from ____________ to

Commission File Number 001-12505

CORE MOLDING TECHNOLOGIES, INC.

_______________________________________________________________

(Exact name of registrant as specified in its charter)


Delaware	31-1481870
(State or other jurisdiction incorporation or organization)	(I.R.S. Employer Identification No.)

800 Manor Park Drive, Columbus, Ohio	43228-0183
(Address of principal executive office)	(Zip Code)

Registrant's telephone number, including area code (614) 870-5000

N/A

__________________________________________________________

Former name, former address and former fiscal year, if changed since last report.

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒No ¨

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒No ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of "accelerated filer," "large accelerated filer," and "smaller reporting company," in Rule 12b-2 of the Exchange Act.


Large accelerated filer ¨	Accelerated Filer ☒	Non-accelerated Filer ¨	Smaller reporting company	☒
Emerging growth company	☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨

Indicate by check mark whether the registrant is a shell company as defined in Rule 12b-2 of the Exchange Act. Yes ☐No ☒

Securities registered pursuant to Section 12(b) of the Act:


Title of each class	Name of each exchange on which registered	Trading Symbol
Common Stock, par value $0.01	NYSE American LLC	CMT

As of November 4, 2024, the latest practicable date, 8,955,360 shares of the registrant's common stock were issued, which includes 304,795 shares of unvested restricted common stock.

Table of Contents

Table of Contents


Part I - Financial Information

Item 1. Financial Statements (Unaudited)

Consolidated Statements of Operations	3

Consolidated Statements of Comprehensive Income	4

Consolidated Balance Sheets	5

Consolidated Statement of Stockholders' Equity	6

Consolidated Statements of Cash Flows	8

Notes to Consolidated Financial Statements	9

Item 2. Management's Discussion and Analysis of Financial Condition and Results of Operations	23

Item 3. Quantitative and Qualitative Disclosures About Market Risk	29

Item 4. Controls and Procedures	29

Part II - Other Information

Item 1. Legal Proceedings	30

Item 1A. Risk Factors	30

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds	30

Item 3. Defaults Upon Senior Securities	30

Item 4. Mine Safety Disclosures	30

Item 5. Other Information	30

Item 6. Exhibits	30

Signatures	31

Index to Exhibits	33

Table of Contents

Part I - Financial Information

Item 1. Financial Statements

Core Molding Technologies, Inc. and Subsidiaries

Consolidated Statements of Operations

(In thousands, except for per share data)

(Unaudited)


Three months ended September 30,	Nine months ended September 30,
2024	2023	2024	2023
Net sales	$	72,992	$	86,728	$	239,880	$	283,961

Cost of sales	60,647	71,450	196,505	230,380

Gross margin	12,345	15,278	43,375	53,581

Selling, general and administrative expense	8,740	9,403	27,550	29,562

Operating income	3,605	5,875	15,825	24,019

Other income and expense
Net interest (income) expense	(144)	187	(99)	836
Net periodic post-retirement benefit	(138)	(52)	(414)	(157)
Total other (income) and expense	(282)	135	(513)	679

Income before taxes	3,887	5,740	16,338	23,340

Income tax expense	727	1,386	3,000	5,198

Net income	$	3,160	$	4,354	$	13,338	$	18,142

Net income per common share:
Basic	$	0.36	$	0.50	$	1.53	$	2.13
Diluted	$	0.36	$	0.49	$	1.51	$	2.08

See notes to unaudited consolidated financial statements.

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

Consolidated Statements of Comprehensive Income

(In thousands)

(Unaudited)


Three months ended September 30,	Nine months ended September 30,
2024	2023	2024	2023
Net income	$	3,160	$	4,354	$	13,338	$	18,142

Other comprehensive income:

Foreign currency hedging derivatives:
Unrealized hedge gain (loss)	(1,040)	(898)	(2,672)	208
Net tax benefit (expense)	216	192	563	(50)

Interest rate swaps:
Unrealized hedge gain (loss)	(558)	209	(285)	366
Net tax benefit (expense)	116	(44)	58	(76)

Post-retirement benefit plan adjustments:
Amortization of net actuarial (gain) loss	(37)	6	(111)	18
Amortization of prior service credits	(124)	(124)	(372)	(372)
Net tax benefit	34	25	101	75

Comprehensive income	$	1,767	$	3,720	$	10,620	$	18,311

See notes to unaudited consolidated financial statements.

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

Consolidated Balance Sheets

(In thousands, except for share data)


September 30, 2024	December 31, 2023
(Unaudited)
Assets:
Current assets:
Cash and cash equivalents	$	42,348	$	24,104
Accounts receivable, net	36,777	41,711
Inventories, net	20,687	22,063
Foreign tax receivable	5,996	6,380
Prepaid expenses and other current assets	9,690	8,621
Total current assets	115,498	102,879

Right of use asset	2,314	3,802
Property, plant and equipment, net	79,171	81,185
Goodwill	17,376	17,376
Intangibles, net	4,827	6,017
Other non-current assets	1,465	2,118
Total Assets	$	220,651	$	213,377

Liabilities and Stockholders' Equity:
Current liabilities:
Current portion of long-term debt	$	1,814	$	1,468
Accounts payable	25,011	23,958
Contract liability	4,695	5,204
Compensation and related benefits	7,779	10,498
Accrued other liabilities	8,582	5,058
Total current liabilities	47,881	46,186

Other non-current liabilities	2,191	3,759
Long-term debt	20,164	21,519
Post-retirement benefits liability	2,575	2,960
Total Liabilities	72,811	74,424
Commitments and Contingencies
Stockholders' Equity:
Preferred stock - $0.01 par value, authorized shares - 10,000,000; no shares outstanding at September 30, 2024 and December 31, 2023	-	-
Common stock - $0.01 par value, authorized shares - 20,000,000; outstanding shares: 8,650,565 at September 30, 2024 and 8,655,384 at December 31, 2023	87	86
Paid-in capital	45,332	43,265
Accumulated other comprehensive income, net of income taxes	2,583	5,301
Treasury stock - at cost, 4,200,683 shares at September 30, 2024 and 3,992,152 shares at December 31, 2023	(35,569)	(31,768)
Retained earnings	135,407	122,069
Total Stockholders' Equity	147,840	138,953
Total Liabilities and Stockholders' Equity	$	220,651	$	213,377

See notes to unaudited consolidated financial statements.

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

Consolidated Statement of Stockholders' Equity

(In thousands, except for share data)

(Unaudited)

For the three months ended September 30, 2023:


Common Stock Outstanding	Paid-In Capital	Accumulated Other Comprehensive Income	Treasury Stock	Retained Earnings	Total Stockholders' Equity
Shares	Amount
Balance at June 30, 2023	8,603,072	86	41,829	3,856	(31,006)	115,533	130,298
Net income	4,354	4,354
Change in post-retirement benefits, net of tax of $25	(93)	(93)
Change in foreign currency hedge, net of tax of $192	(706)	(706)
Change in interest rate swaps, net of tax of $44	165	165
Restricted stock vested	12,807	-
Purchase of treasury stock related to net settlement of equity awards	(29,804)	(762)	(762)
Exercise of SARs	69,309	-
Share-based compensation	736	736
Balance at September 30, 2023	8,655,384	$	86	$	42,565	$	3,222	$	(31,768)	$	119,887	$	133,992

For the nine months ended September 30, 2023:


Common Stock Outstanding	Paid-In Capital	Accumulated Other Comprehensive Income	Treasury Stock	Retained Earnings	Total Stockholders' Equity
Shares	Amount
Balance at December 31, 2022	8,417,656	$	84	$	40,342	$	3,053	$	(29,099)	$	101,745	$	116,125
Net income	18,142	18,142
Change in post-retirement benefits, net of tax of $75	(279)	(279)
Change in foreign currency hedge, net of tax of $50	158	158
Change in interest rate swaps, net of tax of $76	290	290
Restricted stock vested	262,788	2	2
Purchase of treasury stock related to net settlement of equity awards	(125,701)	(1)	(2,669)	(2,670)
Exercise of SARs	100,641	1	1
Share-based compensation	2,223	2,223
Balance at September 30, 2023	8,655,384	$	86	$	42,565	$	3,222	$	(31,768)	$	119,887	$	133,992

Table of Contents

For the three months ended September 30, 2024:


Common Stock Outstanding	Paid-In Capital	Accumulated Other Comprehensive Income	Treasury Stock	Retained Earnings	Total Stockholders' Equity
Shares	Amount
Balance at June 30, 2024	8,759,404	88	44,770	3,976	(33,578)	132,247	147,503
Net income	3,160	3,160
Change in post-retirement benefits, net of tax of $34	(127)	(127)
Change in foreign currency hedge, net of tax of $216	(824)	(824)
Change in interest rate swaps, net of tax of $116	(442)	(442)
Restricted stock vested	4,353	-	-
Purchase of treasury stock related to net settlement of equity awards	(1,308)	-	(21)	(21)
Purchase of treasury stock	(111,884)	(1)	(1,970)	(1,971)
Share-based compensation	562	562
Balance at September 30, 2024	8,650,565	$	87	$	45,332	$	2,583	$	(35,569)	$	135,407	$	147,840

For the nine months ended September 30, 2024:


Common Stock Outstanding	Paid-In Capital	Accumulated Other Comprehensive Income	Treasury Stock	Retained Earnings	Total Stockholders' Equity
Shares	Amount
Balance at December 31, 2023	8,655,384	$	86	$	43,265	$	5,301	$	(31,768)	$	122,069	$	138,953
Net income	13,338	13,338
Change in post-retirement benefits, net of tax of $101	(382)	(382)
Change in foreign currency hedge, net of tax of $563	(2,109)	(2,109)
Change in interest rate swaps, net of tax of $58	(227)	(227)
Restricted stock vested	203,712	2	2
Purchase of treasury stock related to net settlement of equity awards	(72,658)	-	(1,438)	(1,438)
Purchase of treasury stock	(135,873)	(1)	(2,363)	(2,364)
Share-based compensation	2,067	2,067
Balance at September 30, 2024	8,650,565	$	87	$	45,332	$	2,583	$	(35,569)	$	135,407	$	147,840

See notes to unaudited consolidated financial statements.

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

Consolidated Statements of Cash Flows

(In thousands)

(Unaudited)


Nine months ended September 30,
2024	2023
Cash flows from operating activities:
Net income	$	13,338	$	18,142
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation and amortization	10,018	9,575
Loss on disposal of property, plant and equipment	241	80
Share-based compensation	2,067	2,223
Losses on foreign currency remeasurement	1,306	202
Change in operating assets and liabilities:
Accounts receivable	4,934	(1,677)
Inventories	1,376	(1,117)
Prepaid and other assets	(2,037)	(4,474)
Accounts payable	(270)	(414)
Accrued and other liabilities	56	4,340
Post-retirement benefits liability	(867)	(731)
Net cash provided by operating activities	30,162	26,149

Cash flows from investing activities:
Purchase of property, plant and equipment	(7,045)	(6,803)
Net cash used in investing activities	(7,045)	(6,803)

Cash flows from financing activities:
Gross repayments on revolving line of credit	-	(38,962)
Gross borrowings on revolving line of credit	-	37,098
Payments for taxes related to net share settlement of equity awards	(1,439)	(2,669)
Purchase of common shares	(2,363)	-
Payment of principal on term loans	(1,071)	(961)
Net cash used in financing activities	(4,873)	(5,494)

Net change in cash and cash equivalents	18,244	13,852

Cash and cash equivalents at beginning of period	24,104	4,183

Cash and cash equivalents at end of period	$	42,348	$	18,035

Cash paid for:
Interest	$	788	$	939
Income taxes	$	1,633	$	4,518
Non-cash investing activities:
Fixed asset purchases in accounts payable	$	245	$	848

See notes to unaudited consolidated financial statements.

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

(Unaudited)

1. BASIS OF PRESENTATION

The accompanying unaudited consolidated financial statements have been prepared in accordance with the instructions to Form 10-Q and include all of the information and disclosures required by accounting principles generally accepted in the United States of America for interim reporting, which are less than those required for annual reporting. In the opinion of management, the accompanying unaudited consolidated financial statements contain all adjustments (all of which are normal and recurring in nature) necessary to present fairly the financial position of Core Molding Technologies, Inc. and its subsidiaries ("Core Molding Technologies" or the "Company") at September 30, 2024, and the results of operations and cash flows for the nine months ended September 30, 2024. The "Notes to Consolidated Financial Statements" contained in the Company's Annual Report on Form 10-K for the year ended December 31, 2023, should be read in conjunction with these consolidated financial statements.

Core Molding Technologies and its subsidiaries operate in the engineered materials market as one operating segment as a molder of thermoplastic and thermoset structural products. The Company produces and sells molded products for varied markets, including medium and heavy-duty trucks, power sports, building products, industrial and utilities and other commercial markets. Core Molding Technologies has its headquarters in Columbus, Ohio, and operates six production facilities in the United States, Canada and Mexico.

2. CRITICAL ACCOUNTING POLICIES AND ESTIMATES

Principles of Consolidation: Management believes the following critical accounting policies, among others, affect its more significant judgments and estimates used in the preparation of its consolidated financial statements.

Use of Estimates: The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, disclosures of contingent assets and liabilities, and reported amounts of revenues and expenses during the reporting period. On an on-going basis, management evaluates its estimates and judgments. Management bases its estimates and judgments on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions and conditions.

Revenue Recognition: The Company historically has recognized revenue from two streams, product revenue and tooling revenue. Product revenue is earned from the manufacture and sale of sheet molding compounds and thermoset and thermoplastic products. Revenue from product sales is generally recognized when products are shipped, as the Company transfers control to the customer and is entitled to payment upon shipment. In certain circumstances, the Company recognizes revenue from product sales when products are produced and the customer takes control at our production facility.

Tooling revenue is earned from manufacturing multiple tools, molds and assembly equipment as part of a tooling program for a customer. Given that the Company is providing a significant service of producing highly interdependent component parts of the tooling program, each tooling program consists of a single performance obligation to provide the customer the capability to produce a single product. Based on the arrangement with the customer, the Company recognizes revenue either at a point in time or over a given period. When the Company does not have an enforceable right to payment, the Company recognizes tooling revenue at a point in time. In such cases, the Company recognizes revenue upon customer acceptance, which is when the customer has legal title to the tools.

Certain tooling programs include an enforceable right to payment. In those cases, the Company recognizes revenue over time based on the extent of progress towards completion of its performance obligation. The Company uses a cost-to-cost measure of progress for such contracts because it best depicts the transfer of value to the customer and also correlates with the amount of consideration to which the entity expects to be entitled in exchange for transferring the promised goods or services to the customer. Under the cost-to-cost measure of progress, progress towards completion is measured based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligation. Revenues are recorded proportionally as costs are incurred.

Table of Contents

Cash and Cash Equivalents: The Company considers all highly liquid investments purchased with an original maturity of three months or less to be cash equivalents. Cash is held primarily in three banks in three separate jurisdictions. The Company had $42,348,000 cash on hand at September 30, 2024 and had $24,104,000 cash on hand at December 31, 2023.

Accounts Receivable Allowances:Management maintains allowances for credit losses resulting from the inability of its customers to make required payments. If the financial condition of the Company's customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. The Company has determined that no allowance for credit losses is needed at September 30, 2024 and none is needed at December 31, 2023. Management also records estimates for customer returns and deductions, discounts offered to customers, and for price adjustments. Should customer returns and deductions, discounts, and price adjustments fluctuate from the estimated amounts, additional allowances may be required. The Company had an allowance for estimated chargebacks of $229,000 at September 30, 2024 and $138,000 at December 31, 2023. There have been no material changes in the methodology of these calculations.

Inventories:Inventories, which include material, labor and manufacturing overhead, are valued at the lower of cost or net realizable value. The inventories are accounted for using the first-in, first-out (FIFO) method of determining inventory costs. Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based on historical and anticipated usage. The Company has recorded an allowance for slow moving and obsolete inventory of $673,000 at September 30, 2024 and $671,000 at December 31, 2023.

Contract Assets/Liabilities: Contract assets and liabilities represent the net cumulative customer billings, vendor payments and revenue recognized for tooling programs. For tooling programs where net revenue recognized and vendor payments exceed customer billings, the Company recognizes a contract asset. For tooling programs where net customer billings exceed revenue recognized and vendor payments, the Company recognizes a contract liability. Customer payment terms vary by contract and can range from progress payments based on work performed or one single payment once the contract is completed. The Company has recorded contract assets of $4,555,000 at September 30, 2024, and $77,000 at December 31, 2023. Contract assets are generally classified as current within prepaid expenses and other current assets on the Consolidated Balance Sheets. For the nine months ended September 30, 2024 and September 30, 2023 the Company recognized no impairments on contract assets. For the nine months ended September 30, 2024, the Company recognized $3,902,000 of revenue from contract liabilities related to open jobs outstanding as of December 31, 2023.

Income Taxes:The Company evaluates the balance of deferred tax assets that will be realized based on the premise that the Company is more-likely-than-not to realize deferred tax benefits through the generation of future taxable income.

Long-Lived Assets:Long-lived assets consist primarily of property, plant and equipment and definite-lived intangibles. The recoverability of long-lived assets is evaluated by an analysis of operating results and consideration of other significant events or changes in the business environment. The Company evaluates whether impairment exists for property, plant and equipment on the basis of undiscounted expected future cash flows from operations before interest. There were no impairment charges of the Company's long-lived assets for the nine months ended September 30, 2024 and 2023, respectively.

Goodwill:The purchase consideration of acquired businesses has been allocated to the assets and liabilities acquired based on the estimated fair values on the respective acquisition dates. Based on these values, the excess purchase consideration over the fair value of the net assets acquired was allocated to goodwill. The Company accounts for goodwill in accordance with FASB ASC Topic 350, Intangibles - Goodwill and Other. FASB ASC Topic 350 prohibits the amortization of goodwill and requires these assets be reviewed for impairment.

The annual impairment tests of goodwill may be completed through qualitative assessments; however, the Company may elect to bypass the qualitative assessment and proceed directly to a quantitative impairment test for any period. The Company may resume the qualitative assessment in any subsequent period.

Under a qualitative and quantitative approach, the impairment test for goodwill consists of an assessment of whether it is more-likely-than-not that the fair value is less than its carrying amount. As part of the qualitative assessment, the Company considers relevant events and circumstances that affect the fair value or carrying amount of the Company. Such events and circumstances could include changes in economic conditions, industry and market conditions, cost factors, overall financial performance, and capital markets pricing. The Company places more weight on the events and circumstances that most affect the Company's fair value or carrying amount. These factors are all considered by management in reaching its conclusion about whether to perform step one of the impairment test. If the Company elects to bypass the qualitative assessment, or if a qualitative assessment indicates it is more-likely-than-not that the estimated carrying value exceeds its fair value, the Company proceeds to a quantitative approach. There were no impairment charges of the Company's goodwill for the nine months ended September 30, 2024 and 2023, respectively.

Table of Contents

Self-Insurance:The Company is self-insured with respect to its facilities in Columbus, Ohio; Gaffney, South Carolina; Winona, Minnesota; and Brownsville, Texas for medical, dental and vision claims and Columbus, Ohio for workers' compensation claims, all of which are subject to stop-loss insurance thresholds. The Company is also self-insured for dental and vision with respect to its Cobourg, Canada location. The Company has recorded an estimated liability for self-insured medical, dental and vision claims incurred but not reported and worker's compensation claims incurred but not reported at September 30, 2024 and December 31, 2023 of $1,057,000 and $988,000, respectively. Estimated liabilities for self-insurance are classified as current within accrued other liabilities on the Consolidated Balance Sheets.

Post-Retirement Benefits:Management records an accrual for post-retirement costs associated with the health care plan sponsored by Core Molding Technologies. Should actual results differ from the assumptions used to determine the reserves, additional provisions may be required. In particular, increases in future healthcare costs above the assumptions could have an adverse effect on Core Molding Technologies' operations. The effect of a change in healthcare costs is described in Note 10, "Post-Retirement Benefits", of the Notes to Consolidated Financial Statements contained in the Company's Annual Report on Form 10-K for the year ended December 31, 2023. Core Molding Technologies had a liability for post-retirement healthcare benefits based on actuarial computed estimates of $2,731,000 at September 30, 2024 and $3,116,000 at December 31, 2023.

3. RECENT ACCOUNTING PRONOUNCEMENTS

In November 2023, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update ("ASU") No. 2023-07, Improvements to Reportable Segment Disclosures (Topic 280). This ASU updates reportable segment disclosure requirements by requiring disclosures of significant reportable segment expenses that are regularly provided to the Chief Operating Decision Maker ("CODM") and included within each reported measure of a segment's profit or loss. This ASU also requires disclosure of the title and position of the individual identified as the CODM and an explanation of how the CODM uses the reported measures of a segment's profit or loss in assessing segment performance and deciding how to allocate resources. The ASU is effective for annual periods beginning after December 15, 2023, and interim periods within fiscal years beginning after December 15, 2024. As this accounting standard only impacts disclosure, it will not have a material impact on the Company's Consolidated Financial Statements.

In December 2023, the FASB issued ASU No. 2023-09, Improvements to Income Tax Disclosures (Topic 740). The ASU requires disaggregated information about a reporting entity's effective tax rate reconciliation as well as additional information on income taxes paid. The ASU is effective on a prospective basis for annual periods beginning after December 15, 2024. As this accounting standard only impacts disclosure, it will not have a material impact on the Company's Consolidated Financial Statements.

4. NET INCOME PER COMMON SHARE

Net income per common share is computed based on the weighted average number of common shares outstanding during the period. Diluted net income per common share is computed similarly but includes the effect of the assumed exercise of dilutive stock appreciation rights and restricted stock under the treasury stock method.

The computation of basic and diluted net income per common share (in thousands, except for per share data) is as follows:


Three months ended September 30,	Nine months ended September 30,
2024	2023	2024	2023
Net income	$	3,160	$	4,354	$	13,338	$	18,142

Weighted average common shares outstanding - basic	8,716	8,623	8,709	8,515
Effect of weighted average dilutive securities	77	219	103	201
Weighted average common and potentially issuable common shares outstanding - diluted	8,793	8,842	8,812	8,716

Basic net income per common share	$	0.36	$	0.50	$	1.53	$	2.13
Diluted net income per common share	$	0.36	$	0.49	$	1.51	$	2.08

Table of Contents

5. MAJOR CUSTOMERS

The Company had five major customers during the nine months ended September 30, 2024, BRP, Inc. ("BRP"), Navistar, Inc. ("Navistar"), PACCAR, Inc. ("PACCAR"), Volvo Group North America, LLC ("Volvo") and Yamaha Motor Corporation ("Yamaha"). Major customers are defined as customers whose sales individually consist of more than ten percent of the Company's total sales during any annual or interim reporting period presented. The loss of a significant portion of sales to these customers could have a material adverse effect on the Company.

The following table presents sales revenue for the above-mentioned customers for the three and nine months ended September 30, 2024 and 2023 (in thousands):


Three months ended September 30,	Nine months ended September 30,
2024	2023	2024	2023
BRP product sales	$	6,677	$	9,169	$	23,502	$	33,770
BRP tooling sales	153	3,502	382	4,240
Total BRP sales	6,830	12,671	23,884	38,010

Navistar product sales	17,294	18,612	49,932	55,625
Navistar tooling sales	430	426	650	612
Total Navistar sales	17,724	19,038	50,582	56,237

PACCAR product sales	8,691	9,238	29,250	28,160
PACCAR tooling sales	57	59	423	789
Total PACCAR sales	8,748	9,297	29,673	28,949

Volvo product sales	10,262	13,102	36,487	44,073
Volvo tooling sales	-	-	-	799
Total Volvo sales	10,262	13,102	36,487	44,872

Yamaha product sales	8,360	7,060	25,694	23,417
Yamaha tooling sales	-	-	-	-
Total Yamaha sales	8,360	7,060	25,694	23,417

Other product sales	19,974	23,715	66,180	89,888
Other tooling sales	1,094	1,845	7,380	2,588
Total other sales	21,068	25,560	73,560	92,476

Total product sales	71,258	80,896	231,045	274,933
Total tooling sales	1,734	5,832	8,835	9,028
Total sales	$	72,992	$	86,728	$	239,880	$	283,961

Table of Contents

6. INVENTORY

Inventories, net consisted of the following (in thousands):


September 30, 2024	December 31, 2023
Raw materials	$	13,843	$	13,068
Work in process	2,295	2,649
Finished goods	4,549	6,346
Total	$	20,687	$	22,063

Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based on historical and anticipated usage.

7. LEASES

The Company has operating leases with fixed payment terms for certain buildings and warehouses. The Company's leases have remaining lease terms of less than one year to four years, some of which include options to extend the lease for five years. Operating leases are included in operating lease right-of-use ("ROU") assets, accrued other liabilities and other non-current liabilities in the Consolidated Balance Sheets. ROU assets represent the Company's right to use an underlying asset for the lease term and lease liabilities represent the Company's obligation to make lease payments arising from the lease.

The Company used the applicable incremental borrowing rate to measure lease liabilities and ROU assets. The incremental borrowing rate used by the Company was based on baseline rates and adjusted by the credit spreads commensurate with the Company's secured borrowing rate. At each reporting period when there is a new lease initiated, the Company will utilize its incremental borrowing rate to perform lease classification tests on lease components and to measure ROU assets and lease liabilities.

The components of lease expense were as follows (in thousands):


Three months ended September 30,	Nine months ended September 30,
2024	2023	2024	2023
Operating lease cost	$	524	$	497	$	1,593	$	1,360
Short-term lease cost	$	499	$	474	$	1,321	$	1,440
Total net lease cost	$	1,023	$	971	$	2,914	$	2,800

Other supplemental balance sheet information related to leases was as follows (in thousands):


September 30, 2024	December 31, 2023
Operating lease right of use assets	$	2,314	$	3,802

Current operating lease liabilities(A)	$	1,285	$	1,981
Noncurrent operating lease liabilities(B)	1,020	1,828
Total operating lease liabilities	$	2,305	$	3,809

(A)Current operating lease liabilities are included in accrued other liabilitiesin the Consolidated Balance Sheets.

(B)Noncurrent operating lease liabilities are included in other non-current liabilitiesin the Consolidated Balance Sheets.

Table of Contents

8. PROPERTY, PLANT & EQUIPMENT

Property, plant and equipment, net consisted of the following for the periods specified (in thousands):


September 30, 2024	December 31, 2023
Property, plant and equipment	$	215,942	$	209,333
Accumulated depreciation	(136,771)	(128,148)
Property, plant and equipment - net	$	79,171	$	81,185

Property, plant, and equipment are recorded at cost, unless obtained through acquisition, then assets are recorded at estimated fair value at the date of acquisition. Depreciation is provided on a straight-line method over the estimated useful lives of the assets. The carrying amount of long-lived assets is evaluated annually to determine if an adjustment to the depreciation period or to the unamortized balance is warranted. Depreciation expense for the three months ended September 30, 2024 and 2023 was $2,979,000 and $2,812,000, respectively. Depreciation expense for the nine months ended September 30, 2024 and 2023 was $8,766,000 and $8,311,000, respectively. Amounts invested in capital additions in progress were $3,701,000 and $2,264,000 at September 30, 2024 and December 31, 2023, respectively. At September 30, 2024 and December 31, 2023, purchase commitments for capital expenditures in progress were $3,184,000 and $1,100,000, respectively.

9. GOODWILL AND INTANGIBLES

Goodwill activity for the nine months ended September 30, 2024 consisted of the following (in thousands):


Balance at December 31, 2023	$	17,376
Additions	-
Impairment	-
Balance at September 30, 2024	$	17,376

Intangibles, net at September 30, 2024 were comprised of the following (in thousands):


Definite-lived Intangible Assets	Amortization Period	Gross Carrying Amount	Accumulated Amortization	Net Carrying Amount
Trade name	25 Years	$	250	$	(96)	$	154
Trademarks	10 Years	1,610	(1,080)	530
Non-competition agreement	5 Years	1,810	(1,810)	-
Developed technology	7 Years	4,420	(4,235)	185
Customer relationships	10-12 Years	9,330	(5,372)	3,958
Total	$	17,420	$	(12,593)	$	4,827

Intangibles, net at December 31, 2023 were comprised of the following (in thousands):


Definite-lived Intangible Assets	Amortization Period	Gross Carrying Amount	Accumulated Amortization	Net Carrying Amount
Trade name	25 Years	$	250	$	(88)	$	162
Trademarks	10 Years	1,610	(959)	651
Non-competition agreement	5 Years	1,810	(1,810)	-
Developed technology	7 Years	4,420	(3,762)	658
Customer relationships	10-12 Years	9,330	(4,784)	4,546
Total	$	17,420	$	(11,403)	$	6,017

The aggregate intangible asset amortization expense was $397,000 and $396,000 for the three months ended September 30, 2024 and 2023, respectively. The aggregate intangible amortization expense was $1,190,000 and $1,205,000 for the nine months ended September 30, 2024 and 2023, respectively.

Table of Contents

10. POST-RETIREMENT BENEFITS

The components of expense for the Company's post-retirement benefit plans are as follows (in thousands):


Three months ended September 30,	Nine months ended September 30,
2024	2023	2024	2023
Pension expense:
Multi-employer plan	$	199	$	221	$	624	$	734
Defined contribution plan	459	471	1,397	1,440
Total pension expense	658	692	2,021	2,174
Health and life insurance:
Interest cost	23	66	69	197
Amortization of prior service credits	(124)	(124)	(372)	(372)
Amortization of net loss (gain)	(37)	6	(111)	18
Net periodic benefit credit	(138)	(52)	(414)	(157)
Total post-retirement benefits expense	$	520	$	640	$	1,607	$	2,017

The Company made payments of $2,156,000 to pension plans and $455,000 for post-retirement healthcare and life insurance during the nine months ended September 30, 2024. For the remainder of 2024, the Company expects to make approximately $479,000 of pension plan payments, of which $93,000was accrued at September 30, 2024. The Company also expects to make approximately $93,000 of post-retirement healthcare and life insurance payments for the remainder of 2024, all of which were accrued at September 30, 2024.

11. DEBT

Debt consists of the following (in thousands):


September 30, 2024	December 31, 2023

Huntington term loans payable	22,187	23,230
Leaf Capital term loan payable	20	48
Total	22,207	23,278
Less deferred loan costs	(229)	(291)
Less current portion	(1,814)	(1,468)
Long-term debt	$	20,164	$	21,519

Huntington Credit Agreement

On July 22, 2022, the Company entered into a credit agreement (the "Huntington Credit Agreement") with The Huntington National Bank ("Huntington"), as the sole lender, administrative agent, lead arranger and book runner, and the lenders from time to time thereto. Pursuant to the terms of the Huntington Credit Agreement, Huntington made available to the Company secured loans (the "Huntington Loans") in the maximum aggregate principal amount of $75,000,000, comprised of three $25,000,000 commitments: a term loan commitment, a CapEx loan commitment and a revolving loan commitment.

At the option of the Company, the Huntington Loans shall be comprised of Alternative Base Rate (ABR) Loans or Secure Overnight Financing Rate (SOFR) Loans.

ABR Loans bear interest at a per annum rate equal to ABR plus a margin of 280 to 330 basis points determined based on the Company's leverage ratio. ABR is the greatest of (a) the Prime Rate in effect on such day, (b) the Federal Funds Rate in effect on such day plus 0.50% per annum and (c) Daily Simple SOFR for such day (taking into account any floor set forth in the definition of "Daily Simple SOFR") plus 1.00% per annum; provided, that if the ABR shall be less than 0.00%, then ABR shall be deemed to be 0.00%.

Table of Contents

Business Days prior to (i) if such SOFR Rate Day is a U.S. Government Securities Business Day, such SOFR Rate Day or (ii) if such SOFR Rate Day is not a U.S. Government Securities Business Day, the U.S. Government Securities Business Day immediately preceding such SOFR Rate Day, in each case, as such SOFR is published by the SOFR Administrator on the SOFR Administrator's Website, and (b) 0.00%.

The Company's obligations under the Huntington Credit Agreement are secured by all of the U.S. and Canadian assets of the Company, including all of its equity interests in each of the Company's U.S. and Canadian subsidiaries and 65% of the Company's equity interest in its Mexican subsidiaries, and are unconditionally guaranteed by certain subsidiaries of the Company.

The Huntington Credit Agreement contains certain customary representations and warranties, conditions, affirmative and negative covenants and events of default. The Company is in compliance with such covenants as of September 30, 2024.

Voluntary prepayments of amounts outstanding under the Huntington Loans are permitted at any time without premium or penalty.

The Company incurred debt origination fees of $402,000 related to the Huntington Credit Agreement, which is being amortized over the life of the agreement.

Huntington Capex Loan

Pursuant to the terms of the Huntington Credit Agreement, Huntington made available to the Company secured Capex loan (the "Huntington Capex Loan") in the maximum aggregate principal amount of $25,000,000 which none was outstanding as of September 30, 2024 and December 31, 2023. Proceeds of the Huntington Capex Loan will be used to finance the ongoing capital expenditure needs of the Company.

Any borrowings from the Huntington Capex Loan will be converted to new term loans annually each February, beginning February 2025, and will have monthly principal repayments based on a sixty-month amortization period with all amounts outstanding on the Huntington Capex Loan being fully due on July 22, 2027.

Huntington Revolving Loan

Pursuant to the terms of the Huntington Credit Agreement, Huntington made available to the Company a revolving loan commitment (the "Huntington Revolving Loan") of $25,000,000. The Company has $25,000,000 of available revolving loans of which none was outstanding as of September 30, 2024 and December 31, 2023.

The Huntington Credit Agreement makes available to the Company a revolving commitment in the maximum amount of $25,000,000 at the Company's option at any time during the five-year period following the closing. The revolving loan commitment terminates, and all outstanding borrowings thereunder must be repaid on July 22, 2027.

The interest rate for the Huntington Revolving Loan was 6.85% and 7.11% as of September 30, 2024 and December 31, 2023, respectively.

Huntington Term Loan

Pursuant to the terms of the Huntington Credit Agreement, Huntington made available to the Company a Term Loan commitment (the "Huntington Term Loan") of $25,000,000 all of which was advanced to the Company on July 22, 2022. The Huntington Term Loan is to be repaid in monthly installments beginning August 2022 of $104,000 per month for the first 24 months, $156,000 per month for the next 24 months, $208,000 for the next 12 months and the remaining balance to be paid on July 22, 2027. The interest rate for the Huntington Term Loan was 6.85% and 7.11% as of September 30, 2024 and December 31, 2023, respectively.

Interest Rate Swap Agreement

The Company entered into an interest rate swap agreement that became effective July 22, 2022 and continues through July 2027, which was designed as a cash flow hedge for $25,000,000 of the Huntington Term Loan. Under this agreement, the Company will pay a fixed rate of 2.95% to the swap counterparty in exchange for the Term Loans daily variable SOFR. As a result the interest rate paid on the Huntington Term Loan was 4.75% as of September 30, 2024 and December 31, 2023. The fair value of the interest rate swap was an asset of $237,000 and $524,000 at September 30, 2024 and December 31, 2023, respectively.

Leaf Capital Funding

On April 24, 2020 the Company entered into a finance agreement with Leaf Capital Funding of $175,000 for equipment. The parties agreed to a fixed interest rate of 5.50% and a term of 60 months.

Table of Contents

12. INCOME TAXES

The Company evaluates the balance of deferred tax assets that will be realized based on the premise that the Company is more-likely-than-not to realize deferred tax benefits through the generation of future taxable income. Management makes assumptions, judgments, and estimates to determine the deferred tax assets and liabilities. The Company evaluates provisions and deferred tax assets quarterly to determine if adjustments to our valuation allowance are required based on the consideration of all available evidence.

At September 30, 2024, the Company had a net deferred tax asset of $1,595,000 related to tax positions in Mexico and deferred tax liabilities of $1,182,000 and $43,000 related to tax positions in the United States and Canada. Deferred tax assets are included in "Other non-current assets" on the Consolidated Balance Sheets and deferred tax liabilities are included in "Other non-current liabilities" on the Consolidated Balance Sheets. As of September 30, 2024, the Company had a valuation allowance of $1,530,000, against the deferred tax asset related to local tax positions in the Unites States, due to cumulative losses over the last three years and uncertainty related to the Company's ability to realize the deferred assets. The Company believes that the deferred tax assets associated with the Canadian, Mexican, and federal United States tax jurisdictions are more-likely-than-not to be realizable based on estimates of future taxable income.

Income tax expense for the nine months ended September 30, 2024 is estimated to be $3,000,000, approximately 18.4% of income before income taxes. Income tax expense for the nine months ended September 30, 2023 was estimated to be $5,198,000, approximately 22.3% of income before income taxes.

The Company files income tax returns in the United States, Mexico, Canada and various state and local jurisdictions. The Company is subject to federal income tax examinations for tax years 2014 through 2017 but the scope of examination is limited to adjustments resulting from Net Operating Loss carry back claims from the 2019, and 2020 tax years. The Company is subject to federal income tax examinations for years 2020 through 2023 with unlimited scope. The Company is not subject to state income tax examinations for years before 2020. The Company is not subject to Mexican income tax examinations by Mexican authorities for the years before 2018 and is not subject to Canadian income tax examinations by Canadian authorities for the years before 2019.

13. STOCK BASED COMPENSATION

On May 13, 2021, the Company's stockholders approved the 2021 Long Term Equity Incentive Plan and, on May 14, 2024, the Company's stockholders approved an amendment to the 2021 Long Term Equity Incentive Plan (as amended, the "2021 Plan"). The 2021 Plan replaced the 2006 Long Term Equity Incentive Plan (the "2006 Plan") approved in May 2006 and amended in May 2015. The 2021 Plan allows for grants to employees, officers, non-employee directors, consultants, independent contractors and advisors of non-qualified stock options, incentive stock options, stock appreciation rights, restricted stock, restricted stock units, and other stock-based awards ("stock awards") up to an aggregate of 1,094,823 shares for issuance. At September 30, 2024, 322,498 shares of common stock were available for issuance under the 2021 Plan. Awards can be granted under the 2021 Plan through the earlier of May 13, 2031, or the date the maximum number of available shares under the 2021 Plan have been granted.

Awards under the 2021 Plan vest over oneto three years and shares previously awarded and currently unvested under the 2006 Plan vest over three years. Shares granted under the 2021 Plans vest immediately upon the date of a participant's death, disability or change in control.

The Company follows the provisions of FASB ASC 718 requiring that compensation cost relating to share-based payment transactions be recognized in the financial statements. The cost is measured at the grant date, based on the calculated fair value of the award, and is recognized as an expense over the employee's requisite service period (generally the vesting period of the equity award).

During the nine months ended September 30, 2024 employees withheld 72,658 shares of the Company's common stock to satisfy income withholding obligations in connection with the vesting of restricted awards, and in the same period in 2023 the Company withheld 125,701 shares.

Restricted Stock

The Company grants shares of its common stock to certain directors, officers, key managers and employees in the form of unvested stock and units ("Restricted Stock"). These awards are measured at the fair value of the Company's common stock

Table of Contents

on the date of issuance and recognized ratably as compensation expense over the applicable vesting period, which is typically three years. The Company adjusts compensation expense for actual forfeitures, as they occur.

The following summarizes the status of Restricted Stock and changes during the nine months ended September 30, 2024:


Number of Shares	Weighted Average Grant Date Fair Value
Unvested balance at December 31, 2023	373,583	$	12.81
Granted	94,704	19.18
Vested	(203,712)	13.16
Forfeited	-	-
Unvested balance at September 30, 2024	264,575	$	15.49

At September 30, 2024 and 2023, there was $2,907,000 and $3,676,000, respectively, of total unrecognized compensation expense, related to Restricted Stock grants. The unrecognized compensation expense at September 30, 2024 is expected to be recognized over the weighted-average period of 1.7 years. Total compensation cost related to Restricted Stock grants for the three months ended September 30, 2024 and 2023 was $501,000 and $721,000, respectively. Total compensation cost related to Restricted Stock grants for the nine months ended September 30, 2024 and 2023 was $1,914,000 and $2,187,000 all of which was recorded to selling, general and administrative expense.

Performance Restricted Stock Awards

The Company grants shares of its common stock to certain officers and key managers in the form of shares of performance-based restricted stock ("Performance Restricted Stock Awards"). These awards are measured at the fair value of the Company's common stock on the date of issuance and recognized ratably as compensation expense over the applicable vesting period to the extent that the performance measures have been satisfied as of the last day of the performance period of the award. The total amount payable as of the award's vesting date is determined by the three year average Operational Income and Return on Capital Employed performance measure achievement. The Company adjusts compensation expense for actual forfeitures as they occur, and for estimated performance measure achievement.

The following summarizes the status of Performance Restricted Stock Awards and changes during the nine months ended September 30, 2024:


Number of Shares	Weighted Average Grant Date Fair Value
Unvested balance at December 31, 2023	11,737	$	15.98
Granted	28,483	19.18
Vested	-	-
Forfeited	-	-
Unvested balance at September 30, 2024	40,220	$	18.24

At September 30, 2024 and 2023, there was $529,000 and $151,000 of total unrecognized compensation expense related to Performance Restricted Stock Awards. The unrecognized compensation expense at September 30, 2024 is expected to be recognized over the weighted-average period of 2.3 years. Total compensation cost related to Performance Restricted Stock Awards for the three months ended September 30, 2024 and 2023 was $61,000 and $16,000, respectively. Total compensation cost related to Performance Restricted Stock grants for the nine months ended September 30, 2024 and 2023 was $153,000 and $36,000, respectively all of which was recorded to selling, general and administrative expense.

Table of Contents

14. LONG TERM INCENTIVE COMPENSATION

The Company grants phantom stock ("Phantom Stock Awards") to key employees under the 2021 Plan. These Phantom Stock Awards are measured based on the fair value of the Company's common stock on the vesting date and are marked to market at each reporting period. Compensation expense is recognized over the applicable vesting period, typically three years, and is adjusted for actual forfeitures as they occur.

At September 30, 2024, there was $405,000 of total unrecognized compensation expense related to Phantom Stock Awards. The unrecognized compensation expense at September 30, 2024 is expected to be recognized over the weighted-average period of 3 years. Total compensation cost related to Phantom Stock Awards for the three months ended September 30, 2024 was $14,000. Total compensation cost related to Phantom Stock Awards for the nine months ended September 30, 2024 was also $14,000. A total of 23,276 shares of phantom stock were granted in 2024. No Phantom Stock Awards were granted in 2023.

15. STOCK REPURCHASE PLAN

On March 11, 2024, the Company announced that its Board of Directors approved a stock repurchase program authorizing the Company to repurchase up to $7,500,000 of its outstanding shares of common stock. Repurchases of shares of common stock under the stock repurchase program are made in the open market and in accordance with applicable securities laws. The stock repurchase program does not obligate the Company to acquire any particular amount of common stock, and it may be suspended or terminated at any time at the Company's discretion. There were 111,884 shares with an average stock price of repurchased under the repurchase program during the three months ended September 30, 2024, totaling $1,970,000. There were 135,873 shares of common stock repurchased under the repurchase program for the nine months ended September 30, 2024, totaling $2,363,000.

16. FAIR VALUE OF FINANCIAL INSTRUMENTS

Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in a transaction between market participants as of the measurement date. Fair value is measured using the fair value hierarchy and related valuation methodologies as defined in the authoritative literature. This hierarchical valuation methodology provides a fair value framework that describes the categorization of assets and liabilities in three levels based upon the assumptions (inputs) used to price the assets or liabilities. Level 1 provides the most reliable measure of fair value, whereas Level 3 generally requires significant management judgment.

The three levels are defined as follows:

Level 1 - Quoted prices in active markets for identical assets and liabilities.

Level 2 - Quoted prices for similar instruments in active markets, quoted prices for identical or similar instruments in markets that are not active and model-derived valuations, in which all significant inputs are observable in active markets.

Level 3 -Significant unobservable inputs reflecting management's own assumptions about the inputs used in pricing the asset or liability.

The Company's financial instruments consist of cash and cash equivalents, accounts receivable, accounts payable, debt, interest rate swaps and foreign currency derivatives. Cash and cash equivalents, accounts receivable and accounts payable carrying values as of September 30, 2024 and December 31, 2023 approximate fair value due to the short-term maturities of these financial instruments. As of September 30, 2024 and December 31, 2023, the carrying amounts of the Huntington Term Loan approximated fair value due to the short-term nature of the underlying variable rate SOFR used to determine interest charged on the loans. The Company had Level 2 fair value measurements at September 30, 2024 relating to the Company's interest rate swaps and foreign currency derivatives.

Derivative and hedging activities

Foreign Currency Derivatives

The Company conducted business in foreign countries and paid certain expenses in foreign currencies; therefore, the Company was exposed to foreign currency exchange risk between the U.S. Dollar and foreign currencies, which could impact the

Table of Contents

Company's operating income and cash flows. To mitigate risk associated with foreign currency exchange, the Company entered into forward contracts to exchange a fixed amount of U.S. Dollars for a fixed amount of foreign currency, which will be used to fund future foreign currency cash flows. At inception, all forward contracts are formally documented as cash flow hedges and are measured at fair value each reporting period.

Derivatives are formally assessed both at inception and at least quarterly thereafter, to ensure that derivatives used in hedging transactions are highly effective in offsetting changes in cash flows of the hedged item. If it is determined that a derivative ceases to be a highly effective hedge, or if the anticipated transaction is no longer probable of occurring, hedge accounting is discontinued, and any future mark-to-market adjustments are recognized in earnings. The effective portion of gain or loss is reported in other comprehensive income and the ineffective portion is reported in earnings. The impacts of these contracts were largely offset by gains and losses resulting from the impact of changes in exchange rates on transactions denominated in the foreign currency. As of September 30, 2024, the Company had no ineffective portion related to the cash flow hedges. The notional contract value of foreign currency derivatives was $33,813,000 and $9,195,000 as of September 30, 2024 and December 31, 2023, respectively.

Interest Rate Swap

The Company entered into an interest rate swap contract to fix the interest rate on an initial aggregate amount of $25,000,000 thereby reducing exposure to interest rate changes. The interest rate swap pays a fixed rate of 2.95% to the swap counterparty in exchange for daily SOFR. At inception, all interest rate swaps were formally documented as cash flow hedges and are measured at fair value each reporting period. See Note 11, "Debt", for additional information. The notional contract value of the interest rate swap was $22,187,000 and $23,229,000 as of September 30, 2024 and December 31,2023, respectively.

Financial statement impacts

The following table detail amounts related to our derivatives designated as hedging instruments (in thousands):


Fair Value of Derivative Instruments September 30, 2024
Asset Derivatives	Liability Derivatives
Balance Sheet Location	Fair Value	Balance Sheet Location	Fair Value
Foreign exchange contracts	Prepaid expenses other current assets	$	27	Accrued other liabilities	$	2,079
Other non-current assets	$	-	Other non-current liabilities	$	-

Interest rate swaps	Prepaid expenses other current assets	$	237	Accrued other liabilities	$	-
Other non-current assets	$	-	Other non-current liabilities	$	-


Fair Value of Derivative Instruments December 31, 2023
Asset Derivatives	Liability Derivatives
Balance Sheet Location	Fair Value	Balance Sheet Location	Fair Value
Foreign exchange contracts	Prepaid expenses other current assets	$	620	Accrued other liabilities	$	-
Other non-current assets	$	-	Other non-current liabilities	$	-

Interest rate swaps	Prepaid expenses other current assets	$	419	Accrued other liabilities	$	-
Other non-current assets	$	105	Other non-current liabilities	$	-

Table of Contents

The following tables summarize the amount of unrealized and realized gain (loss) recognized in Accumulated Other Comprehensive Income ("AOCI") for the three months ended September 30, 2024 and 2023 (in thousands):


Derivatives in subtopic 815-20 Cash Flow Hedging Relationship:	Amount of Unrealized Gain (Loss) Recognized in Accumulated Other Comprehensive Income on Derivative	Location of Gain (Loss) Reclassified from Accumulated Other Comprehensive Income(A)	Amount of Realized Gain (Loss) Reclassified from Accumulated Other Comprehensive Income
2024	2023	2024	2023
Foreign exchange contracts	$	(1,756)	$	88	Cost of goods sold	$	(551)	$	897
Selling, general and administrative expense	$	(164)	$	89
Interest rate swaps	$	(427)	$	334	Interest expense	$	132	$	125

The following tables summarize the amount of unrealized and realized gain (loss) recognized in AOCI for the nine months ended September 30, 2024 and 2023 (in thousands):


Derivatives in subtopic 815-20 Cash Flow Hedging Relationship:	Amount of Unrealized Gain (Loss) Recognized in Accumulated Other Comprehensive Income on Derivative	Location of Gain (Loss) Reclassified from Accumulated Other Comprehensive Income(A)	Amount of Realized Gain (Loss) Reclassified from Accumulated Other Comprehensive Income
2024	2023	2024	2023
Foreign exchange contracts	$	(2,972)	$	2,073	Cost of goods sold	$	(246)	$	1,697
Selling, general and administrative expense	$	(54)	$	168
Interest rate swaps	$	121	$	707	Interest expense	$	406	$	341

(A)The foreign currency derivative activity reclassified from Accumulated Other Comprehensive Income is allocated to cost of goods sold and selling, general and administrative expense based on the percentage of foreign currency spend.

Table of Contents

17. ACCUMULATED OTHER COMPREHENSIVE INCOME

The following table presents changes in Accumulated Other Comprehensive Income, net of tax, for the nine months ended September 30, 2024 and 2023 (in thousands):


2023:	Derivative Hedging Activities	Post Retirement Benefit Plan Items(A)	Accumulated Other Comprehensive Income (Loss)
2023:
Balance at December 31, 2022	$	546	$	2,507	$	3,053
Other comprehensive income before reclassifications	2,780	-	2,780
Amounts reclassified from accumulated other comprehensive income	(2,206)	(354)	(2,560)
Income tax benefit (expense)	(126)	75	(51)
Balance at September 30, 2023	$	994	$	2,228	$	3,222

2024:
Balance at December 31, 2023	$	901	$	4,400	$	5,301
Other comprehensive income before reclassifications	(2,851)	-	(2,851)
Amounts reclassified from accumulated other comprehensive income	(106)	(483)	(589)
Income tax benefit	621	101	722
Balance at September 30, 2024	$	(1,435)	$	4,018	$	2,583

(A)The effect of post-retirement benefit items reclassified from Accumulated Other Comprehensive Income is included in other income and expense on the Consolidated Statements of Operations. These Accumulated Other Comprehensive Income components are included in the computation of net periodic benefit cost (see Note 10, "Post-Retirement Benefits" for additional details). The tax effect of post-retirement benefit items reclassified from Accumulated Other Comprehensive Income is included in income tax expense on the Consolidated Statements of Operations.

Table of Contents

Item 2. Management's Discussion and Analysis of Financial Condition and Results of Operations

This Management's Discussion and Analysis of Financial Condition and Results of Operations contains forward-looking statements within the meaning of the federal securities laws, which are subject to the "safe harbor" created by Section 27A of the Securities Act of 1933, as amended (the "Securities Act"), and Section 21E of the Securities Exchange Act of 1934, as amended (the "Exchange Act"). As a general matter, forward-looking statements are those focused upon future plans, objectives or performance as opposed to historical items and include statements of anticipated events or trends and expectations and beliefs relating to matters not historical in nature. Such forward-looking statements involve known and unknown risks and are subject to uncertainties and factors relating to Core Molding Technologies' operations and business environment, all of which are difficult to predict and many of which are beyond Core Molding Technologies' control. Words such as "may," "will," "could," "would," "should," "anticipate," "predict," "potential," "continue," "expect," "intend," "plans," "projects," "believes," "estimates," "encouraged," "confident" and similar expressions are used to identify these forward-looking statements. These uncertainties and factors could cause Core Molding Technologies' actual results to differ materially from those matters expressed in or implied by such forward-looking statements.

Core Molding Technologies believes that the following factors, among others, could affect its future performance and cause actual results to differ materially from those expressed or implied by forward-looking statements made in this Quarterly Report on Form 10-Q:

•dependence upon certain major customers as the primary source of Core Molding Technologies' sales revenues and the potential loss of any major customers due to the completion of existing production programs with those customers or otherwise;

•business conditions in the plastics, transportation, power sports, utilities and commercial product industries (including changes in demand for production);

•the availability and price increases of raw materials;

•general economic, social, regulatory (including foreign trade policy) and political environments in the countries in which Core Molding Technologies operates;

•safety and security conditions in Mexico;

•fluctuations in foreign currency exchange rates;

•efforts of Core Molding Technologies to expand its customer base; the ability to develop new and innovative products and to diversify markets, materials and processes and increase operational enhancements;

•ability to accurately quote and execute manufacturing processes for new business; the actions of competitors, customers, and suppliers;

•failure of Core Molding Technologies' suppliers to perform their obligations;

•inflationary pressures; new technologies; regulatory matters;

•labor relations and labor availability as well as possible work stoppages or labor disruptions at one or more of our union locations or one of our customer or supplier locations;

•the loss or inability of Core Molding Technologies to attract and retain key personnel;

•the ability to successfully identify, evaluate and manage potential acquisitions and to benefit from and properly integrate any completed acquisitions;

•federal, state and local environmental laws and regulations (including engine emission regulations);

•the availability of sufficient capital; the ability of Core Molding Technologies to provide on-time delivery to customers, which may require additional shipping expenses to ensure on-time delivery or otherwise result in late fees and other customer charges; risk of cancellation or rescheduling of orders;

Table of Contents

•management's decision to pursue new products or businesses which involve additional costs, risks or capital expenditures;

•inadequate insurance coverage to protect against potential hazards; equipment and machinery failure; product liability and warranty claims;

•cybersecurity incidents or other similar disruptions impacting Core Molding Technologies or significant customers and/or suppliers; and

•other risks identified from time to time in Core Molding Technologies' other public documents on file with the Securities and Exchange Commission, including those described in Item 1A of the Core Molding Technologies' Annual Report on Form 10-K for the year ended December 31, 2023.

Description of the Company

Business Overview

General

The Company's business and operating results are directly affected by changes in overall customer demand, operational costs and performance and leverage of our fixed cost and selling, general and administrative ("SG&A") infrastructure.

Product sales fluctuate in response to several factors, including many that are beyond the Company's control, such as general economic conditions, interest rates, government regulations, consumer spending, raw material cost inflation, labor availability, and our customers' production rates and inventory levels. The Company's customers operate in many different markets with different cyclicality and seasonality.

Operating performance is dependent on the Company's ability to manage changes in input costs for items such as raw materials, labor, and overhead operating costs. The Company has certain contractual commitments that restrict its ability to pass through changes in input costs to certain customers. As a result, during periods of significant increases or decreases in input costs operating results may be impacted.

Performance is also affected by manufacturing efficiencies, including items such as on time delivery, quality, scrap, and productivity. Market factors of supply and demand can impact operating costs. In periods of rapid increases or decreases in customer demand, the Company is required to ramp operational activity up or down quickly, which may impact manufacturing efficiencies more than in periods of steady demand.

Operating performance is also dependent on the Company's ability to effectively launch new customer programs, which are extremely complex in nature. The start of production of a new program is the result of a process of developing new molds and assembly equipment, validation testing, manufacturing process design, development and testing, along with training and often hiring employees. Meeting the targeted levels of manufacturing efficiency for new programs usually occurs over time as the Company gains experience with new tools and processes. Therefore, during a new program launch period, start-up costs and inefficiencies can affect operating results.

Business Outlook

Looking forward, based on industry analyst projections, customer forecasts, anticipated price changes, as well as anticipated new program launches, offset by current programs that we expect to continue to ramp down in the fourth quarter of 2024 as further described below, the Company expects revenues for the fourth quarter of 2024 to decrease by approximately 17 to 20 percent as compared to the same period in 2023. Additional factors contributing to our anticipated 2024 revenue outlook include an expected seasonal demand slowdown, decreased customer inventory builds due to optimizing inventory levels as well as a consumer demand environment that is more consistent with pre-pandemic levels.

Table of Contents

Beginning in the second half of 2024 and continuing through 2026, the Company's business with Volvo has and will begin transitioning from existing programs that the Company currently supplies to new programs that the Company does not support. Notwithstanding this transition and the completion of existing programs with Volvo, the Company continues to actively bid for new Volvo business, which we believe we will continue to secure outside of the current programs. Going forward we remain focused on continuing to replace phased out business from existing programs with new programs from Volvo or other customers.

The Company's raw material supply chains remain stable, and the Company anticipates raw material pricing in the fourth quarter of 2024 to remain flat or slightly lower as compared to 2023. Labor markets have also stabilized, although at higher cost levels over the past several years. The Company does not anticipate challenges in hiring hourly labor, although management believes wage pressure will continue primarily in Mexico.

As a result of overall demand level declines by our customers, the Company restructured its fixed cost and selling, general and administrative costs by reducing labor levels during the third quarter. As a result, the Company incurred restructuring charges, primarily severance costs, of $228,000 for the three months ended September 30, 2024 and anticipates additional restructuring charges of approximately $81,000 in the three months ended December 31, 2024. The labor reduction is expected to provide annual savings of approximately $2,627,000.

Results of Operations

Three Months Ended September 30, 2024, as Compared to Three Months Ended September 30, 2023

Net sales for the three months ended September 30, 2024 and 2023 totaled$72,992,000 and $86,728,000, respectively. Included in net sales were tooling project sales of $1,734,000 and $5,832,000 for the three months ended September 30, 2024 and 2023, respectively. Tooling sales are sporadic in nature and fluctuate in regard to scope and related revenue on a period-to-period basis. Product sales, excluding tooling project sales, for the three months ended September 30, 2024 were $71,258,000 compared to $80,896,000 for the same period in 2023. The decrease in sales is primarily the result of lower demand across most industries. The Company's product sales for the three months ended September 30, 2024 compared to the same period in 2023 by market are as follows (in thousands):


Three months ended September 30,
2024	2023
Medium and heavy-duty truck	$	41,324	$	46,413
Power sports	16,464	18,524
Building products	2,348	4,595
Industrial and utilities	4,961	6,154
All other	6,161	5,210
Net product revenue	$	71,258	$	80,896

Gross margin was 16.9% and 17.6% of sales for the three months ended September 30, 2024 and 2023, respectively. Gross margin compared to last year was unfavorably impacted by lower fixed cost leverage of 1.5% and operational inefficiencies and product mix of 2.4%, offset by net changes in selling price and raw material costs of 3.2%.

Selling general and administrative expense ("SG&A") was $8,740,000 for the three months ended September 30, 2024, compared to $9,403,000 for the three months ended September 30, 2023. Decreased SG&A expenses resulted primarily from lower bonus and labor and benefits of $961,000 offset by higher severance payment cost of $228,000 and unfavorable foreign currency translation of $612,000. In the three months ended September 30, 2023 the Company also incurred a $540,000 one-time press relocation cost.

Net interest income totaled $144,000 for the three months ended September 30, 2024, compared to net interest expense of $187,000 for the three months ended September 30, 2023. Lower net interest expense was primarily due to higher interest income of $440,000 from investment of the Company's accumulated cash balances.

Income tax expense for the three months ended September 30, 2024 is estimated to be $727,000, approximately 18.7% of income before income taxes. Income tax expense for the three months ended September 30, 2023 was estimated to be $1,386,000, approximately 24.1% of income before income taxes. The company's effective tax rate reflects the effects of

Table of Contents

taxable income being generated in lower tax rate jurisdictions and the benefit of lower tax rates of foreign derived intangible income.

The Company recorded net income for the three months ended September 30, 2024 of$3,160,000 or $0.36 per basic and diluted share compared with net income of $4,354,000, or $0.50 per basic and $0.49 per diluted share, for the three months ended September 30, 2023.

Comprehensive income totaled $1,767,000 for the three months ended September 30, 2024, compared to comprehensive income of $3,720,000 for the same period ended September 30, 2023. The decrease was primarily related to the decrease in net income of $1,194,000 and decrease in valuation of interest rate swaps of $607,000.

Nine Months Ended September 30, 2024, as Compared to Nine Months Ended September 30, 2023

Net sales for the nine months ended September 30, 2024 and 2023 totaled$239,880,000 and $283,961,000, respectively. Included in net sales were tooling project sales of $8,835,000 and $9,028,000 for the nine months ended September 30, 2024 and 2023, respectively. Tooling sales are sporadic in nature and fluctuate in regard to scope and related revenue on a period-to-period basis. Product sales, excluding tooling project sales, for the nine months ended September 30, 2024 were $231,045,000compared to $274,933,000for the same period in 2023. The decrease in sales is primarily the result of lower demand across most industries. The Company's product sales for the nine months ended September 30, 2024 compared to the same period in 2023 by market are as follows (in thousands):


Nine months ended September 30,
2024	2023
Medium and heavy-duty truck	$	129,674	$	140,104
Power sports	56,225	59,619
Building products	14,322	27,301
Industrial and utilities	12,482	17,525
All other	18,342	30,384
Net product revenue	$	231,045	$	274,933

Gross margin was approximately 18.1% of sales for the nine months ended September 30, 2024, compared with 18.9% for the same period in 2023. The gross margin percentage decrease was due to lower fixed cost leverage of 1.4% and operational inefficiencies and product mix of 1.3%, offset by net changes in selling price and raw material costs of 1.9% .

SG&A was $27,550,000for the nine months ended September 30, 2024, compared to SG&A costs of $29,562,000for the same period in 2023. Decreased SG&A expenses resulted primarily from lower bonus and labor and benefits of $2,262,000 and offset by severance payment cost of $228,000. The Companyalso incurred a one-time press relocation cost of $540,000 in 2023.

Net interest income totaled $99,000 for the nine months ended September 30, 2024, compared to net interest expense of $836,000for the same period in 2023. Lower interest expense was primarily due to higher interest income of $1,032,000 from investment of the Company's accumulated cash balances.

Income tax expense for the nine months ended September 30, 2024 is estimated to be $3,000,000, approximately 18.4% of income before income taxes, and includes tax expense in United States, Canadian and Mexican tax jurisdictions. The Company recognized a tax benefit of $282,000 related to the difference in grant price and vest price for stock awards that vested during the nine months ended September 30, 2024. Income tax expense for the same period in 2023 was estimated to be $5,198,000, approximately 22.3% of income before income taxes, and includes tax expense in United States, Canadian and Mexican tax jurisdictions. The Company recognized a tax benefit of $535,000 related to the difference in grant price and vest price for stock awards that vested during the nine months ended September 30, 2023. The Company's effective tax rate reflects the effects of taxable income being generated in lower tax rate jurisdictions and Foreign-Derived Intangible Income rate utilization throughout the year.

The Company recorded net income for the nine months ended September 30, 2024 of$13,338,000 or $1.53per basic share and $1.51 per diluted share, compared with net income of $18,142,000, or $2.13 per basic and $2.08 per diluted share, for the same period in 2023.

Table of Contents

Comprehensive income totaled $10,620,000 for the nine months ended September 30, 2024, compared to comprehensive income of $18,311,000for the same period in 2023. The decrease was related to the decrease in net income of $4,804,000 and a decrease in valuation of foreign currency hedging of $2,267,000.

Liquidity and Capital Resources

Historically, the Company's primary sources of funds have been cash generated from operating activities and borrowings from third parties. Primary cash requirements are for operating expenses, capital expenditures, repayments of debt, and acquisitions. The Company from time to time will enter into foreign exchange contracts and interest rate swaps to mitigate risk of foreign exchange and interest rate volatility. As of September 30, 2024, the Company had outstanding foreign exchange contracts with notional amounts totaling $33,813,000. As of September 30, 2024, the Company had outstanding interest rate swaps with notional amounts totaling $22,187,000.

Cash provided by operating activities for the nine months ended September 30, 2024 totaled $30,162,000. Net income of $13,338,000positively impacted operating cash flows. Non-cash deductions of depreciation and amortization, and share-based compensation included in net income amounted to $10,018,000 and $2,067,000, respectively. Decreased working capital increased cash provided by operating activities by $3,192,000.

Cash used in investing activities for the nine months ended September 30, 2024was $7,045,000, which related to purchases of property, plant and equipment. The Company anticipates spending approximately $11,000,000 to $13,000,000during 2024 on property, plant and equipment purchases for all of the Company's operations. At September 30, 2024, purchase commitments for capital expenditures in progress were $3,184,000. The Company anticipates using cash from operations, its available revolving line of credit or its capex line to fund capital investments.

Cash used in financing activities for the nine months ended September 30, 2024 totaled $4,873,000, which consisted of the purchase of treasury stock of $1,439,000 in exchange for payment of taxes related to net shares settlements of equity awards, repayments of long-term debt of $1,071,000 and purchase of treasury stock of $2,363,000.

At September 30, 2024, the Company had $42,348,000 cash on hand, a $25,000,000 revolving loan facility of which none is outstanding, and a $25,000,000 Capex loan facility with no outstanding balance.

The Company is required to meet certain financial covenants included in the Huntington Credit Agreement (defined below), which covenants include a net debt leverage and a fixed charge coverage ratio. As of September 30, 2024, the Company was in compliance with its financial covenants associated with the loans made under the Huntington Credit Agreement as described below.

Management believes cash on hand, cash flow from operating activities and available borrowings under the Company's credit agreement will be sufficient to meet the Company's current liquidity needs.

Huntington Credit Agreement

At the option of the Company, the Huntington Loans shall be comprised of Alternative Base Rate (ABR) Loans or Secure Overnight Financing Rate (SOFR) Loans.

SOFR Loans bear interest at a per annum rate equal to Daily Simple SOFR plus a margin of 180 to 230 basis points determined based on the Company's leverage ratio. Daily Simple SOFR means, for any day (a "SOFR Rate Day"), a rate per annum equal to the greater of (a) SOFR for the day (such day, the "SOFR Determination Date") that is five (5) U.S. Government Securities Business Days prior to (i) if such SOFR Rate Day is a U.S. Government Securities Business Day, such SOFR Rate Day or (ii) if such SOFR Rate Day is not a U.S. Government Securities Business Day, the U.S. Government Securities Business Day

Table of Contents

immediately preceding such SOFR Rate Day, in each case, as such SOFR is published by the SOFR Administrator on the SOFR Administrator's Website, and (b) 0.00%.

Voluntary prepayments of amounts outstanding under the Huntington Loans are permitted at any time without premium or penalty.

The Company incurred debt origination fees of $402,000 related to the Huntington Credit Agreement, which is being amortized over the life of the agreement.

Huntington Capex Loan

Pursuant to the terms of the Huntington Credit Agreement, Huntington made available to the Company secured Capex loan (the "Huntington Capex Loan") in the maximum aggregate principal amount of $25,000,000. Proceeds of the Huntington Capex Loan will be used to finance the ongoing capital expenditure needs of the Company.

Huntington Revolving Loan

The interest rate for the Huntington Revolving Loan was 6.85% and 7.11% as of September 30, 2024 and December 31, 2023, respectively.

Huntington Term Loan

Pursuant to the terms of the Huntington Credit Agreement, Huntington made available to the Company a Term Loan commitment (the "Huntington Term Loan") of $25,000,000 ($25,000,000 of which was advanced to the Company on July 22, 2022). The Huntington Term Loan is to be repaid in monthly installments beginning August 2022 of $104,000 per month for the first 24 months, $156,000 per month for the next 24 months, $208,000 for the next 12 months and the remaining balance to be paid on July 22, 2027. The interest rate for the Huntington Term Loan was 6.85% and 7.11% as of September 30, 2024 and December 31, 2023, respectively.

Interest Rate Swap Agreement

The Company entered into an interest rate swap agreement that became effective July 22, 2022 and continues through July 2027, which was designed as a cash flow hedge for $25,000,000 of the Huntington Term Loan. Under this agreement, the Company will pay a fixed rate of 2.95% to the swap counterparty in exchange for the Term Loans daily variable SOFR. As a result the interest rate paid on the Huntington Term Loan was 4.75% as of March 31, 2024 and December 31, 2023. The fair value of the interest rate swap was an asset of $237,000 and $524,000 at September 30, 2024 and December 31, 2023, respectively.

Leaf Capital Funding

On April 24, 2020 the Company entered into a finance agreement with Leaf Capital Funding of $175,000 for equipment. The parties agreed to a fixed interest rate of 5.50% and a term of 60 months.

Off-Balance Sheet Arrangements

The Company did not have any significant off-balance sheet arrangements as of September 30, 2024 or December 31, 2023.

Table of Contents

The Company did not have or experience any material changes outside the ordinary course of business as to contractual obligations, including long-term debt obligations, capital lease obligations, operating lease obligations, purchase obligations or other long-term liabilities reflected in the Company's Consolidated Balance Sheet under GAAP, as of September 30, 2024 and December 31, 2023.

Critical Accounting Policies and Estimates

For information on critical accounting policies and estimates, see Note 2, "Critical Accounting Policies and Estimates," to the consolidated financial statements included herein.

Item 3. Quantitative and Qualitative Disclosures About Market Risk

Core Molding Technologies' primary market risk results from changes in the price of commodities used in its manufacturing operations. Core Molding Technologies is also exposed to fluctuations in interest rates and foreign currency fluctuations associated with the Mexican Peso and Canadian Dollar. Core Molding Technologies does not hold any material market risk sensitive instruments for trading purposes. The Company uses derivative financial instruments to hedge exposure to fluctuations in foreign exchange rates and interest rates.

Core Molding Technologies has the following three items that are sensitive to market risks: (1) non-hedged loans under the Huntington Credit Agreement, all of which bear a variable interest rate; (2) non-hedged foreign currency purchases in which the Company purchases Mexican Pesos and Canadian Dollars with United States Dollars to meet certain obligations; and (3) raw material purchases in which Core Molding Technologies purchases various resins, fiberglass, and metal components for use in production. The prices and availability of these materials are affected by the prices of crude oil, natural gas and other feedstocks, tariffs, as well as processing capacity versus demand.

Assuming a hypothetical 10% change in short-term interest rates, interest paid on the Term Loan would be impacted, as the interest rate on these loans is based upon SOFR. It would not, however, have a material effect on earnings before tax as the Company has entered into a hedge to offset changes in SOFR.

Assuming a hypothetical 10% decrease in the United States Dollar to Mexican Peso and Canadian Dollar exchange rate, the Company would be impacted by an increase in operating costs, which would have an adverse effect on operating margins.

Assuming a hypothetical 10% increase in commodity prices, Core Molding Technologies would be impacted by an increase in raw material costs, which would have an adverse effect on operating margins.

Item 4. Controls and Procedures

As of the end of the period covered by this report, the Company has carried out an evaluation, under the supervision and with the participation of its management, including its Chief Executive Officer and its Chief Financial Officer, of the effectiveness of the design and operation of its disclosure controls and procedures (as defined in Rule 13a-15(e) of the Exchange Act). Based upon this evaluation, the Company's management, including its Chief Executive Officer and its Chief Financial Officer, concluded that the Company's disclosure controls and procedures were (i) effective to ensure that information required to be disclosed in the Company's reports filed or submitted under the Exchange Act was accumulated and communicated to the Company's management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure, and (ii) effective to ensure that information required to be disclosed in the Company's reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission's rules and forms. There were no changes in internal controls over financial reporting (as such term is defined in Exchange Act Rule 13a-15(f)) that occurred in the last fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

Table of Contents

Part II - Other Information

Item 1. Legal Proceedings

From time to time, the Company is involved in litigation incidental to the conduct of its business. The Company is presently not involved in any legal proceedings which in the opinion of management are likely to have a material adverse effect on the Company's consolidated financial position or results of operations.

Item 1A. Risk Factors

There have been no material changes in Core Molding Technologies' risk factors from those previously disclosed in Core Molding Technologies' Annual Report on Form 10-K for the year ended December 31, 2023.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

Issuer Purchases of Equity Securities

The Company repurchased a total of 113,192 shares of the Company's common stock during the three months ended September 30, 2024. The following table provides information with respect to repurchases of common stock by us and our "affiliated purchasers" (as defined by Rule 10b-18(a)(3) under the Exchange Act) during the three months ended September 30, 2024:


Period	Total Number of Shares Purchased	Average Price Paid per Share	Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs	Maximum Number that May Yet be Purchased Under the Plans or Programs(1)
July 1 to 31, 2024	1,308(2)	$	16.17	-	$	7,106,000
August 1 to 31, 2024	75,000	$	17.63	75,000	$	5,784,000
September 1 to 30, 2024	36,884	$	17.55	36,884	$	5,136,000
Total	113,192	-	111,884	-

1.On March 11, 2024, the Company announced that its Board of Directors approved a stock repurchase program authorizing the Company to repurchase up to $7,500,000 of its outstanding shares of common stock. Repurchases of shares of common stock under the stock repurchase program are made in the open market and in accordance with applicable securities laws. The stock repurchase program does not obligate the Company to acquire any particular amount of common stock, and it may be suspended or terminated at any time at the Company's discretion. The Company repurchased 111,884 shares of the Company's common stock under the stock repurchase program during the three months ended September 30, 2024.

2.Represents shares of the Company's common stock withheld to satisfy income withholding obligations in connection with the vesting of restricted stock awards.

Item 3. Defaults Upon Senior Securities

None.

Item 4. Mine Safety Disclosures

None.

Item 5. Other Information

During the three months ended September 30, 2024, no director or officer of the Company adopted or terminated a "Rule 10b5-1 trading arrangement" or "non-Rule 10b5-1 trading arrangement," as such terms are defined in Item 408(a) of Regulation S-K.

Item 6. Exhibits

See Index to Exhibits.

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.


CORE MOLDING TECHNOLOGIES, INC.
Date:	November 5, 2024	By:	/s/ David L. Duvall
David L. Duvall
President, Chief Executive Officer, and Director


Date:	November 5, 2024	By:	/s/ John P. Zimmer
John P. Zimmer
Executive Vice President, Secretary, Treasurer and Chief Financial Officer

Table of Contents

INDEX TO EXHIBIT


Exhibit No.	Description	Location

3(a)	Amended and Restated Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on May 29, 2024	Incorporated by reference to Exhibit 1 .1 to Registration Statement on Form S-8 (Registration No. 333-281428) filed August 9, 2024

3(b)(1)	Amended and Restated By-Laws of Core Molding Technologies, Inc.	Incorporated by reference to Exhibit 3.1 to Current Report on Form 8-K filed January 4, 2008

3(b)(2)	Amendment No. 1 to the Amended and Restated By-Laws of Core Molding Technologies, Inc.	Incorporated by reference to Exhibit 3.1 to Current Report on Form 8-K filed December 17, 2013


31(a)	Section 302 Certification by David L. Duvall, President, Chief Executive Officer, and Director	Filed Herein

31(b)	Section 302 Certification by John P. Zimmer, Executive Vice President, Secretary, Treasurer, and Chief Financial Officer	Filed Herein

32(a)	Certification of David L. Duvall, Chief Executive Officer of Core Molding Technologies, Inc., dated November 5, 2024, pursuant to 18 U.S.C. Section 1350	Filed Herein

32(b)	Certification of John P. Zimmer, Executive Vice President, Secretary, Treasurer and Chief Financial Officer of Core Molding Technologies, Inc., dated November 5, 2024, pursuant to 18 U.S.C. Section 1350	Filed Herein

101.INS	XBRL Instance Document	Filed Herein

101.SCH	XBRL Taxonomy Extension Schema Document	Filed Herein

101.CAL	XBRL Taxonomy Extension Calculation Linkbase	Filed Herein

101.LAB	XBRL Taxonomy Extension Label Linkbase	Filed Herein

101.PRE	XBRL Taxonomy Extension Presentation Linkbase	Filed Herein

101.DEF	XBRL Taxonomy Extension Definition Linkbase	Filed Herein

104	Cover Page Interactive Data File (formatted in Inline XBRL and contained in Exhibit 101)	Filed Herein

Sharing and Personal Tools

Please select the service you want to use: