CSIRO - Commonwealth Scientific and Industrial Research Organisation

10/25/2024 | News release | Distributed by Public on 10/24/2024 16:29

VAMMIT trials: tackling methane emissions in mining

By Louise Pobjoy25 October 20245 min read

Key points

  • Groundbreaking technology to destroy methane released during the mining process has been trialled successfully.
  • VAMMIT the destroyer is a methane mitigation unit with a flow reversal reactor and regenerative bed that destroys methane.
  • Catalytic VAMMIT has the potential to improve industry conditions and play a key role in helping Australia achieve net zero by 2050.

New CSIRO technology that destroys methane at mine sites is showing great promise - and attracting great interest from industry and governments worldwide.

Potentially explosive environmental issue

Released from coal during the mining process, methane is a highly explosive gas and therefore a serious safety concern in coal mining.

Underground coal mines use large-scale ventilation systems to move fresh air into the mine to flush out methane and other gases. This dilutes methane in the mine to make working conditions safer. However, ventilation air methane (VAM) is then released into the atmosphere, significantly adding to fugitive greenhouse gas emissions.

Dr Yonggang Jin is our Team Leader for Environment and Sustainability within our Mining Research and Development Program.

"Over 60 per cent of emissions from coal mining is from VAM," Yonggang says.

"VAM emissions account for about 15 per cent of total Australia methane emissions and about four per cent total greenhouse gas emissions."

Atmospheric methane levels have more than doubled since pre-industrial times, largely due to human activity. As methane is much more potent than carbon dioxide per molecule in trapping heat in the atmosphere, this is an important environmental issue.

VAM technology

With this in mind, our researchers have been developing a suite of three patented technologies that mitigate methane emissions at mines.

  • VAMMIT the destroyer is a methane mitigation unit with a compact flow reversal reactor and regenerative bed that destroys methane.
  • VAMCAP the concentrator is a capture and enrichment unit that collects and separates methane from ventilated air using carbon composites.
  • VAMCAT the generator uses a catalytic combustion gas turbine to create electricity from captured methane, creating energy from a mining waste product.

In particular, a novel catalytic VAMMIT unit has recently shown great potential for addressing safety and environmental concerns.

World-first pilot scale trial

In December 2023, Yonggang and his research team completed a world-first pilot scale trial of a catalytic VAMMIT unit at an Australian mine, funded by Coal Innovation New South Wales.

The catalytic VAMMIT unit that was trialled at a NSW mine through the CINSW project

While successful, this trial highlighted technical and economic limitations that would prevent the unit's large-scale adoption.

This year, Yonggang's team fast-tracked changes to address these limitations.

With funding from the Department of Industry, Science and Resources, they developed a prototype catalytic VAMMIT unit with a unique honeycomb-shaped catalytic regenerative bed. This optimised design was recently tested in a small-scale pilot trial at our Queensland Centre for Advanced Technologies (QCAT), with outstanding results.

Catalytic VAMMIT keeps its cool

The enhanced catalytic VAMMIT unit shows several distinct advantages over its predecessor, regenerative thermal oxidiser (RTO) VAMMIT.

Significantly, catalytic VAMMIT achieved self-sustaining destruction of VAM with 0.15-0.4 per cent methane, compared to RTO VAMMIT that can only destroy methane above 0.3 per cent VAM.

This makes catalytic VAMMIT more suitable for Australia's low level VAM conditions. It also achieved this at significantly lower temperatures than RTO, making it safer and more economical to run.

Dr Marc Elmouttie is Acting Research Director for the Sustainable Mining Technologies Program.

"A big benefit of catalytic VAMMIT is the ability to deal with the lower concentration methane," Marc says.

"When it's at higher concentrations, you can utilise it or you can flare it. When it's at low concentrations, that's a technically challenging thing."

The catalytic VAMMIT unit has around five times the throughput capacity of the RTO VAMMIT unit, despite being smaller and requiring less power consumption. It also has a much lower pressure drop, at around one-third the pressure of RTO VAMMIT. This means it is more efficient and economical to operate, and produces less GHG emissions itself.

The small-scale pilot unit of the optimised catalytic VAMMIT that was tested at QCAT

However, arguably its most important advantage is its lower operational temperature of between 450 and 600 degrees Celsius, compared with RTO VAMMIT's operational temperature of around 1000 degrees Celsius. This not only enhances workplace safety, but also significantly reduces operational costs.

"The first benefit is a lower safety risk with the lower temperature. There is a reduced risk of ignition of methane in the mine," Yonggang says.

"With high temperature, air expands and a larger volume goes through the reaction bed. With a lower temperature there is lower pressure and reduced operating costs for electricity to drive the fan to push air through the reactor."

A lower operational temperature also helps to maintain the unit, reducing risk of sintering (forming solid mass through heat or pressure, without melting it) and ceramic corrosion.

"Exhaust air contains mine stone dust. At 1000 degrees, that stone dust will be sintering, reacting with the ceramic reactor bed and blocking air passage. Basically, the reactor will have to be stopped," Yonggang says.

Towards net zero and the Global Methane Pledge

Naturally, these exciting results have sparked significant interest from industry and government.

Catalytic VAMMIT has potential to not only improve industry conditions and efficiencies but could also play a key role in helping the Australian Government achieve its Net Zero Plan. This Plan aims to reduce domestic emissions by 43 per cent of 2005 levels by 2030, and reach net zero greenhouse gas emissions by 2050.

Australia now has a target to achieve net zero emissions by 2050.

Catalytic VAMMIT could also play a key role in achieving the Global Methane Pledge. Under this Pledge, more than 120 countries, including Australia, committed to collectively reducing global methane emissions across all sectors by at least 30 per cent below 2020 levels by 2030.

What's next?

The urgent need for this sort of technology has led us to explore a rapid commercialisation pathway for catalytic VAMMIT.

"We are already starting to explore opportunities and working with potential commercial partners for full-scale development. If everything's successful, we can come to some arrangement to commercialise and bring our technology to the market fully," Yonggang says.

Yonggang and his team are currently refining catalytic VAMMIT to improve heat and mass flows to optimise performance, and further lower the pressure drop at high ventilation air flow rates. They plan to start a full-scale catalytic VAMMIT trial at a New South Wales coal mine in November 2024.

"We really want to fast track the commercialisation of this, because if this technology has been fully demonstrated on-site, and has been taken up by industry, we can simultaneously reduce net carbon emissions and safety risks," Yonggang says.

Contacts

Yonggang Jin

Team Leader, Environment and Sustainability

Contacts

Yonggang Jin

Team Leader, Environment and Sustainability